100% d-Limonene floating degreaser engineered for municipal lift stations. Eliminates grease, controls H₂S odors, and protects biological treatment. Biodegradable with built-in red dye dosage indicator.
Heavy-duty acid-replacement cleaner with the performance of hydrofluoric and sulfuric acids but non-corrosive to skin. As an aluminum cleaner and brightener it removes calcium, limescale and silicate deposits, stripping corrosion and oxidation to leave trailer bodies, boats and exterior aluminum bright and clean. As a coil cleaner it clears dust, grime, grease and oxidation from aluminum or copper coils and cooling fins, restoring efficiency and lowering power consumption. Contains no phosphorus. Not for use on anodized aluminum. Corrosive — industrial and commercial use only; review the SDS before handling.
Highly concentrated fleet vehicle wash. Detergents attack dirt and road film and suspend them for fast rinse-off, drying to a spot-free, film-free finish. Formulated for pressure washers and foam brushes: dilute 1:25 for pressure washing, making 26 gallons of wash solution. Dilute 1:100 for hand washing. Corrosive alkaline concentrate (pH 12-13) — industrial and commercial use only; review the SDS before handling.
Heavy-duty truck wash concentrate for high-pressure equipment. Cuts through road tar, salt residue, grease, and exhaust deposits, drying spot-free and film-free. Built for municipal and commercial fleet maintenance. Dilute 1:40 with water for standard pressure-washing use. Corrosive alkaline concentrate (pH 12-14) — industrial and commercial use only; review the SDS before handling.
Water-based cleaner and brightener that lifts brake dust, road grime, oil and scuff marks from wheels and tires without scrubbing or brushing. A low-phosphate alkaline formula that will not deteriorate rubber or harm paint, safe on white walls, chrome, aluminum, magnesium and wire wheels, and on plastic hubcaps. Works in automatic car washes or for manual washing.
Live bacterial formula that destroys organic odors at the source — not by masking them. Works on kitchen and bathroom surfaces, toilets, urinals, rugs, and carpets.
Biological grease trap maintainer with bacteria that resist chlorine and high water temperatures. Reduces pump-out frequency and eliminates foul odors from grease traps and drain lines.
High-alkaline, butyl-free cleaner with fresh citrus fragrance. Compatible with pressure washers, auto scrubbers, and hot tanks. Safe on PPE, rubber suits, and respirators.
Biodegradable, neutral-pH cleaner safe for all hard surfaces. Gentle enough for delicate materials, effective for daily institutional use. Ideal for green procurement programs.
Powerful alkaline concentrate for steam cleaners and pressure washers. Cuts through heavy grease, industrial grime, and road deposits. The go-to for municipal fleet maintenance and industrial wash-downs.
Ready-to-use degreaser rated NFPA 0/0/0. No mixing, no measuring, no hazmat classification. Spray and clean. Built for schools, government, and medical environments.
Zero-hazard industrial degreaser concentrate rated NFPA 0/0/0. No PPE required, no hazmat classification. Dissolves grease, oil, food deposits, and stains while deodorizing.
Heavy-duty caustic drain opener — biodegradable and odorless. High-density formula sinks through standing water to cut through fats, oils, lint, and hair fast.
Chlorine-powered foaming cleaner that clings to vertical surfaces for extended contact time. Built for food service, municipal facilities, and industrial kitchens.
Premium 22% solids high-gloss floor finish with reactive synthetic polymers. Brilliant, lasting shine that withstands frequent burnishing. Built for high-traffic government, school, and commercial floors.
Versatile 16% solids acrylic floor finish. Self-leveling, dries in 30 minutes. The most popular floor finish tier for daily-maintained institutional floors.
20% solids floor finish engineered for superior toughness that extends time between strip-and-refinish cycles, saving labor costs on high-traffic floors.
Concentrated coconut-formula liquid hand soap. Cleans without drying or irritating skin. Gentle enough for daily high-frequency use in institutional restrooms, schools, and government facilities.
Premium pearlized liquid hand and body soap with built-in skin moisturizers. Deep cleans without scrubbing. Compatible with all liquid soap dispensers.
Non-Emulsifying Lift Station (NELS) degreaser with a distinctive red indicator dye. The non-emulsifying formula floats on the water surface to target FOG buildup without dispersing into the wastewater stream — ideal when a skimmable, non-mixing degreaser is required.
Polymeric dispersant and conditioner for sludge management in water and wastewater systems. Improves sludge dewaterability and reduces odor in treatment ponds and clarifiers.
Three-component boiler treatment for hard-water systems combining scale inhibitor, oxygen scavenger, and alkalinity builder. Protects heat transfer surfaces and extends equipment life.
Concentrated scale inhibitor engineered for hard-water boiler systems. Prevents calcium and magnesium scale deposits on heat transfer surfaces for maximum boiler efficiency.
Liquid oxygen scavenger that eliminates dissolved oxygen in boiler feedwater, preventing pitting and corrosion. Compatible with most boiler treatment programs.
Boiler scale inhibitor formulated specifically for soft-water systems. Prevents silica and other mineral deposits without over-treating low-hardness feedwater.
Nitrite-based corrosion inhibitor for closed-loop hot and chilled water systems. Provides long-term protection for ferrous metals in HVAC and process piping.
Three-in-one automotive cleaner, polish and sealant that restores showroom shine in a single pass. d-Limonene lifts tar, road film and insect remains, while waxes and silicone polymers leave a durable seal protecting the finish from sun, wind and rain. Safe on aluminum, chrome, fiberglass and modern clear-coat finishes. Not for use on flat black or textured black paint.
Ultra-concentrated citrus solvent for removing heavy grease, adhesives, wax, tar, and carbon deposits. For use on equipment, engines, and industrial surfaces where maximum degreasing power is required.
Citrus-based drain cleaner and degreaser that penetrates and breaks down grease accumulation in drain lines. Safe for pipes and approved waste systems.
Hydrocarbon-based parts washer solvent that removes grease, oil, and machining compounds from metal parts. Suitable for use in parts washer cabinets and immersion cleaning.
High-dilution citrus cleaner concentrate for industrial and janitorial applications. Cuts through heavy grease and food soils with a pleasant citrus fragrance.
Ultra-high-strength citrus concentrate for demanding degreasing. A small amount goes a long way — ideal for diluting into custom-strength cleaning solutions.
VOC-compliant clear degreaser that meets air quality regulations without sacrificing cleaning power. For use in regulated environments where low VOC is required.
Heavy-duty acid-replacement cleaner with the performance of hydrofluoric and sulfuric acids but non-corrosive to skin. As an aluminum cleaner and brightener it removes calcium, limescale and silicate deposits, stripping corrosion and oxidation to leave trailer bodies, boats and exterior aluminum bright and clean. As a coil cleaner it clears dust, grime, grease and oxidation from aluminum or copper coils and cooling fins, restoring efficiency and lowering power consumption. Contains no phosphorus. Not for use on anodized aluminum. Corrosive — industrial and commercial use only; review the SDS before handling.
Thick, clinging bowl cleaner that clings to vertical surfaces for maximum contact time. Removes lime scale, rust, and hard water stains from toilets and urinals.
Ready-to-use acid surface cleaner for quick application to tile, grout, toilet bowls, and other hard surfaces. Removes mineral deposits and rust stains on contact.
Phosphoric acid cleaner for removing rust, scale, and mineral deposits from metal surfaces and equipment. Less aggressive than HCl; leaves a passivating film to inhibit future corrosion.
High-dilution glass cleaner concentrate that produces streak-free results on glass, mirrors, and chrome. Economical — one gallon makes up to 32 gallons of RTU solution.
VOC-compliant cold solvent that safely removes grease, oil, tar and asphalt from engine parts, brakes, motors and metal parts. Works quickly without causing corrosion under normal conditions, and parts can be air dried or wiped dry — no rinse step. Built for dip tanks, recirculating parts washers and related equipment, and formulated as an alternative to chlorinated solvents. Highly flammable — industrial and commercial use only.
Citrus-scented waterless hand cleaner gel for removing grease, oil, and grime without water. Fast-acting and gentle on skin with natural citrus cleaning agents.
Fresh-scented waterless hand cleaner gel for removing heavy grease and industrial soils without water. Moisturizing formula is gentle with extended use.
Heavy-duty cleaner and degreaser for smokehouse walls, racks, and equipment. Removes heavy carbon and smoke residue from food processing smokehouse equipment.
Caustic-based smokehouse and oven cleaner for the most severe carbon and grease buildup. Professional-grade for commercial food processing environments.
One-step detergent and wax that cleans away dirt and road grime, then deposits a durable coating that beads water and buffs to a high gloss. Leaves vehicles spotless and film free. Safe on cars, trucks, SUVs, buses, motorcycles, ATVs, boats and golf carts. Dilute 3-6 oz per gallon of water.
Concentrated high-foam detergent formulated for automatic and machine wash systems. Delivers a dense, even foam that rinses clean in hard or soft water without streaking, and lubricates foam brushes to extend equipment life. Dilute 1–6 oz per gallon of water.
Ready-to-use emulsifiable solvent for parts washers in maintenance garages, and for degreasing highway equipment, machinery and truck bodies. A blend of solvents and emulsifiers dissolves heavy grease and oil in minutes, then rinses away with water. Professional equipment use only — review the SDS before handling.
Water-based silicone emulsion that protects rubber tires and whitewalls against cracking, fading, hardening and deterioration. Leaves a long-lasting, deep-black protective coating that resists wash-off, with no smudges or runs. Also shines and renews rubber and plastic bumpers, side moldings, mud flaps and air dams.
Ready-to-use silicone emulsion that conditions and protects vinyl, leather, plastic, rubber, wood and metal against cracking, sun fading, hardening and aging. Anti-soil and anti-static agents repel dust and dirt, restoring a like-new luster to dashes, seats, bumpers and trim. Not for use on steering wheels, pedals or other controls where slipperiness could be a hazard, or on or near clear plastic.
Methanol-based concentrate for windshield washer systems in cars, trucks and buses. Penetrates ice, snow and frost fast for clear visibility in winter, and cuts bugs, road film, salt residue and streaks the rest of the year — one product for all four seasons. Dilution is set by target temperature, from 1:15 at 25 °F down to 1:4 at 10 °F. Highly flammable and toxic — industrial and commercial use only; review the SDS before handling.
Multifunctional gasoline fuel additive that clears deposits and clogs from fuel injectors, carburetors and fuel tanks. Detergents remove gum and varnish while upper-cylinder lubrication reduces wear on cold starts, and it is compatible with catalytic converters and computer-controlled engines. Dose 12 oz per 20 gallons of gasoline.
Concentrated anti-gel additive for diesel fuel and all grades of heating fuel oil. Interferes with wax-crystal formation to keep fuel flowing through lines and filters in cold weather, lowering the fuel’s pour point by approximately 20 °F at the standard dose of 12 oz per 150 gallons, with increased dosing lowering it further. Eliminates the need for tank heaters and prevents cold-weather failures in diesel engines, generators and oil-fired boilers. Complies with federal low-sulfur requirements.
Cetane-improving additive for high- and low-sulfur diesel. Raises the cetane number for easier starts, faster warm-ups and less engine noise, while fuel detergency reduces deposit build-up to restore engine power and extend engine life. Also improves fuel economy and reduces exhaust smoke and emissions. Dose 1 gallon per 200 gallons of fuel, or 1 pint per 25 gallons.
VOC-compliant cold solvent that safely removes grease, oil, tar and asphalt from engine parts, brakes, motors and metal parts. Works quickly without causing corrosion under normal conditions, and parts can be air dried or wiped dry — no rinse step. Built for dip tanks, recirculating parts washers and related equipment, and formulated as an alternative to chlorinated solvents. Highly flammable — industrial and commercial use only.
Concentrated, fully soluble powder built for hot parts-washing in spray cabinets and dip tanks. Works most efficiently at elevated temperatures, stripping oil, grease and baked-on deposits from transmissions, radiators, engines and metal parts without foaming problems. Leaves no film or residue and will not plug spray-cabinet jets or build up inside the cabinet. Contains rust inhibitors that prevent flash rusting on cleaned parts, and generates less waste than solvent cleaning. Spray cabinets: 1-2 oz per gallon of water, held at 190°F for best results. Dip tanks: 1 oz per gallon, soak parts 15-20 minutes, then rinse. Supplied as a white powder, completely soluble in water, VOC under 2.0% by weight. DANGER - may damage fertility or the unborn child, and causes serious eye irritation. For industrial and commercial use only; review the SDS before handling. Not DOT regulated.
High-sudsing concentrated powdered detergent that penetrates and removes road film, tar, insects and general road soils quickly and completely without streaking. Developed for automatic car-washing machines and equally suitable for hand washing, it rinses to a spot-free, film-free finish and will not strip the vehicle's existing wax finish. Contains no petroleum distillates or chlorinated solvents, and is formulated for maximum economy and all-weather versatility across fleet, municipal and commercial wash operations. Hand, mop or spray application: 2-6 oz of powder per gallon of water; mop, sponge or spray onto the vehicle, then rinse thoroughly with clean water. Automatic washers: 1-3 oz per gallon in the wash tank, then follow the machine manufacturer's instructions. Supplied as a blue powder, soluble in water. DANGER - causes serious eye damage and skin irritation. For industrial and commercial use only; review the SDS before handling. Not DOT regulated.
Pre-moistened wipes with a water-based silicone formula that cleans vehicle surfaces and protects them from drying, cracking, fading, dulling and deteriorating. A special anti-static ingredient resists dust and repels it from surfaces, so interiors stay cleaner for longer. Restores original lustre to dashboards, vinyl, leather, wood, metal, rubber, seats, trim, door seals and weather stripping on autos, trucks and boats. Ready to use - pull a towel from the canister, wipe down the surface and allow it to dry to the touch. Each canister holds 40 wipes measuring 10 in. x 12 in.; VOC 0% by weight. Carries no GHS hazard classification, no signal word and no required PPE, which makes it straightforward for schools, municipal fleets and sites with chemical-handling restrictions. Not DOT regulated. Minimum order 50 cases (300 canisters, 12,000 wipes) - this is the smallest quantity that ships under Eco Pro Chem branding.
Non-flammable aerosol solvent and degreaser for electrical equipment, with a dielectric strength of 50,000 volts. Removes dust, dirt, oil and tar from energised and delicate equipment, drying fast without corroding parts or leaving residue behind. Built for electric motors, power tools, generators, refrigeration units, ice machines and vending machines. Ready to use - spray directly onto the surface with a heavy wet spray, use the force of the spray to loosen soil, then wipe clean. Supplied in 20 oz cans with 18 oz net contents, twelve cans per case. Sold in case lots of six dozen (72 cans), which is the supplier's minimum order for this aerosol. DANGER - suspected of causing cancer, harmful if inhaled, may cause an allergic skin reaction, and may cause drowsiness or dizziness. Pressurised container. DOT regulated: UN1950, Aerosols, Class 2.2, limited quantity. For industrial and commercial use only; review the SDS before handling.
Aerosol de-icer that instantly lowers the freezing point of water to melt snow, ice and frost from windshields, wiper blades, mirrors, headlights, trunk and door locks, door handles and door creases. Also works as a defogger on the inside of car windows, and helps prevent ice and frost from reforming - giving drivers better visibility for safer winter operation. Ready to use: spray directly onto snow, frost or ice. This is the point-of-use companion to WinterShield™ Windshield Deicer Concentrate, which serves the same fleet from the washer tank. Supplied in 16 oz cans, twelve per case, sold in case lots of six dozen (72 cans), the supplier's minimum order for this aerosol. DANGER - methanol-based. Extremely flammable aerosol; toxic if swallowed, in contact with skin, or inhaled; causes damage to organs. Contains gas under pressure. DOT regulated: UN1950, Aerosols, Class 2.1. Industrial and commercial use only; review the SDS before handling.
VOC-compliant aerosol cold solvent that removes grease, oil, dirt and grime from engine parts, brakes, motors and metal parts. Works quickly on metal without causing corrosion under normal conditions, dries with no residue and needs no rinse step. Also suitable for mechanical parts, ceramics, porcelain and appliances, and is formulated as an alternative to chlorinated solvents. This is the point-of-use companion to AutoForce™ Quick-Dry Solvent Cleaner: a shop with a dip tank wants the bulk liquid, a mobile technician wants the aerosol. Ready to use - spray the surface to remove grime, then wipe dry. Supplied in 20 oz cans with 14 oz net contents, twelve per case, sold in case lots of six dozen (72 cans), the supplier's minimum order for this aerosol. DANGER - extremely flammable aerosol, contains gas under pressure, causes serious eye irritation and may cause drowsiness or dizziness. DOT regulated: UN1950, Aerosols, Class 2.1. Industrial and commercial use only.
Aerosol starting fluid that gets engines turning over in extreme cold and damp weather, effective to -65°F. Works on two-cycle and four-cycle engines and on both gasoline and diesel - the one product in the AutoForce™ line that covers both fuels. High-endurance lubricants protect against corrosion while preserving the battery and ignition system by minimising crank time during start-up. Ready to use: spray into the air cleaner or carburetor for two to three seconds, then repeat up to three more times if the engine still fails to start. Do not exceed that - overuse of starting fluid is a common cause of engine damage. Supplied in 16 oz cans, sold in case lots of six dozen (72 cans), the supplier's minimum order for this aerosol. DANGER - may cause cancer. Extremely flammable liquid, vapour and aerosol; harmful if swallowed; may be fatal if swallowed and enters airways. Industrial and commercial use only; review the SDS before handling.
Premium wax-based surface protectant for vehicles, equipment, and metal surfaces. Provides a long-lasting protective layer against environmental contaminants.
Glycol-based odor neutralizer that permanently eliminates malodors rather than masking them. Effective against sewage, smoke, organic decay, and pet odors.
Lemon-scented biological odor counteractant for drains, lift stations, and sewage systems. Neutralizes hydrogen sulfide and other malodors at the source.
Concentrated citrus odor eliminator for high-intensity odor control in industrial, municipal, and janitorial applications. Eliminates odors — does not just mask them.
95% soy-based floating lift station degreaser with d-Limonene and green indicator dye. Eco-friendly formula that breaks up grease and oil at the water surface in lift stations and wet wells.
Liquid ice melt for pre-wetting dry ice melter or direct application to pavement, walkways, and parking lots. Effective at temperatures as low as -25°F.
Airport-grade liquid ice melt formulated to meet FAA and airline industry standards. Minimizes corrosion on aircraft, concrete, and metal infrastructure.
Methanol-based concentrate for windshield washer systems in cars, trucks and buses. Penetrates ice, snow and frost fast for clear visibility in winter, and cuts bugs, road film, salt residue and streaks the rest of the year — one product for all four seasons. Dilution is set by target temperature, from 1:15 at 25 °F down to 1:4 at 10 °F. Highly flammable and toxic — industrial and commercial use only; review the SDS before handling.
Concentrated liquid tracing dye that creates an intense fluorescent yellow-green color when added to water, readable under ultraviolet light or measured precisely with a fluorometer. Built for flow-time studies, septic inspections, leak detection and overflow analysis across all types of sewer system. Non-toxic, biodegradable, and effective in low light or no sun.
Concentrated silicone defoamer for fast foam knockdown where detergents, surfactants and organic material cause persistent foaming. Its water-based formula prevents re-foaming and stops scum blankets forming, regardless of the water's pH. Used in sewage plants, digesters, aerators, mixing tanks and textile mills.
Flushing aid that breaks up and disperses the organic and inorganic deposits that cloud and collect in storm and sanitary sewers. It separates mud, dirt, silt and sand from the water so deposits flush out cleanly, keeping piping, wells and basins clear and unobstructed.
Cationic polymer flocculant that rapidly precipitates silt, clay, sludge and suspended organic solids for fast clarification of municipal and industrial wastewater. Its high molecular-weight polymers settle solids quickly, increasing the capacity of waste-handling systems and reducing operating costs. Non-toxic and biodegradable — it will not harm fish or wildlife when used as directed.
Silicate inhibitor that forms a thin protective film on exposed metal inside water storage tanks, guarding against rust and corrosion. Protects iron, steel, galvanized steel, brass, bronze, copper and alloys. Non-toxic, odorless and tasteless, and it leaves no residue — treated tanks return to potable water service without cleaning or rinsing.
Blend of anaerobic and aerobic bacillus strains with natural enzymes, cultured to digest organic waste quickly and without odor. Breaks down proteins, starch, carbohydrates, fats, oils and paper to prevent sludge, scum and grease building in drains, grease traps and septic systems. Bacteria ship in spore form for extended shelf life, and regular use establishes thriving colonies for uninterrupted action.
Thickened safer-acid rust remover with a pH below 1 that performs like an acid yet stays mild to skin like liquid dish soap. The thickened formulation extends dwell time to lift new and old, light and heavy rust stains from concrete, restoring the surface to like-new; it also works on metal, porcelain, fiberglass and brick. Non-flammable, biodegradable, and ships DOT non-hazardous.
Concentrated acid-replacement cleaner with a pH below 1 that delivers the cleaning power of an acid while staying as mild to skin as liquid dish soap. At twice the strength of a standard concentrate it lifts stains, rust and algae from concrete, strips cement from equipment, forms and structural steel, and dissolves hard water build-up, lime and scale in boilers, condensers and refrigeration systems. A proprietary inhibitor package protects metals; non-flammable and biodegradable.
Muriatic acid cleaner that dissolves rust, lime, scale and mineral deposits from hard surfaces, and strips mortar, plaster, cement and concrete from tools and equipment. Restores the natural color of brick and stone dulled by wear or weathering. Special inhibitors protect metal surfaces, so it can be used on radiators, boilers, cooling systems, heat exchangers and cement trucks.
Thickened liquid stain absorbent that pours, sprays or brushes on — even on vertical surfaces — then dries to a powder you simply sweep away. No scrubbing and no rinsing. Effective against oils, greases, BBQ grill stains and the silicone oils in tire dressings, on asphalt, concrete, paving stones, pressure-treated wood and composite decking. Biodegradable.
Concentrated alkaline cleaner-degreaser with 6% butyl, combining water softeners with biodegradable low-phosphate surfactants to power away heavy dirt, grease and grime. Water-soluble, non-flammable, non-toxic and non-corrosive, so it dilutes across a wide range of jobs and is safe on any surface not damaged by water. At home in schools, kitchens, maintenance shops and on heavy equipment.
Industrial-strength high-flash parts washer solvent that penetrates grease, oil and tar deposits quickly without corroding metal parts under normal conditions. Natural terpene extracts supply the solvency to cut the most difficult deposits, blended with solvents chosen for low toxicity and high performance. Ideal for recirculating parts washers, and VOC compliant in all 50 states.
Super-absorbent powder that activates instantly on contact, encapsulating water-based spills into a thick gel that lifts away for easy disposal. Absorbs up to 100 times its own weight and neutralizes odors as it works, leaving a light floral fragrance. Non-toxic and substantially biodegradable — used for vomit, blood, body fluids, urine and pet accidents across transport, healthcare, hospitality and schools.
Ready-to-use clinging gel bleach cleaner that removes stains and odors without running, dripping or fallout. Its fast-acting bleach-enhanced formula holds contact with the surface long enough to lift many stains without scrubbing. Effective across tile, grout, plastic, fiberglass and vinyl.
High-flash industrial degreaser and parts washer solvent that removes grease, oil and tar from metal without causing corrosion under normal conditions. Natural citrus extracts deliver the solvency to cut through the most difficult deposits, blended with solvents selected for low toxicity and minimal effect on atmospheric ozone. Ideal for recirculating parts washers, with a light, fresh scent.
Professional-strength anti-static spray that eliminates static electricity on carpets, rugs, upholstery, work surfaces and computer equipment. Provides long-lasting residual protection against the static discharges behind data loss and computing errors, and reduces dust attraction to screens. Non-staining, and safe on both fabrics and hard surfaces.
Gentle concentrated cleaner for routine damp mopping of floors finished with natural wax or synthetic finishes. Its surfactant blend lifts dirt, grease and soil without leaving a dulling film, even without rinsing, and its neutral pH means finishes are never softened or damaged. Biodegradable and phosphate-free; safe on tile, vinyl, linoleum, hardwood, marble, stone, bamboo, ceramic and terrazzo.
Muriatic-acid based cleaner that cleans, etches and whitens concrete in a single step while neutralizing surface alkalinity to extend the life of paints and seals. Opens the pores of concrete floors, brick, masonry block and flagstone to improve the penetration, bonding strength and durability of surface coatings. Used on floors, driveways, walls, loading docks, hangars and warehouses.
Water-based urethane finish and sealer formulated for maximum adhesion to terrazzo and other porous stone flooring. It forms a solid, level surface and creates a strong bond between finish and floor. Also serves as a superior base coat beneath acrylic finishes that will be burnished or spray buffed.
Water-based dust mop treatment that traps dust and dirt in the mop fibers to speed dusting and stop grit damaging the floor's finish. Oil-free, non-toxic and non-flammable, it leaves no slippery residue underfoot. Washes out of mop heads with conventional laundering.
Ready-to-use water-based repellent that leaves a clear protective layer on carpets, rugs, drapery and upholstery. It retards soil accumulation, stops stains setting permanently into fibers and reduces static, so treated surfaces stay cleaner longer and clean up more easily. Safe on all fabric types and constructions.
Low-foaming concentrate built for steam and hot-water extractors, fortified with anti-soil agents and optical brighteners that remove embedded dirt and ground-in grime while separating fibers and raising the nap. Its low foam promotes efficient machine operation and reduces power consumption. Safe on synthetic and natural fibers, including those with factory-applied anti-soil treatments.
Concentrated liquid additive designed to eliminate foaming due to residues left behind on carpets and rugs from cleaning chemicals. It quickly knocks down foam to allow for more efficient pick-up of extractor detergent solutions, and also reduces the build up of foam in the recovery tanks of extractor equipment.
Ready-to-use butyl-based spotter and pre-spray whose penetrating agents cut through the heavy dirt and soil that builds in high-traffic lanes. Removes grease, oil and ground-in dirt with little effort, restoring carpet to its original brilliance. Also works as a pre-treatment to enhance the performance of regular carpet shampoos and extraction cleaners.
Concentrated blend of wetting agents and mild organic pH neutralizers that strips the alkaline residues left by detergents, wax strippers and ice-melting compounds without harming the finish. Eliminates the caustic browning of rugs and carpets caused by detergent and shampoo residue. It also improves the penetrating, adhering and leveling properties of floor finishes applied afterward.
Liquid conditioner and softener that neutralizes calcium and magnesium hardness in wash and rinse tanks, increasing the effectiveness of glass detergents and sanitizers. Eliminates the water spots and mineral haze left on glassware after washing. Works across glass, crystal, plastic, stainless steel, earthenware and china.
Non-foaming liquid cleaner that flushes residues and deposits from beer and wine dispensing lines of up to 100 feet, keeping lines, taps and cooling coils clean and fresh. Protects the true flavor and aroma of what is poured. Also works as a soak solution for faucet parts, strainers and other bar accessories.
Mildly acidic liquid glass detergent formulated for manual brush washing. Strong enough to lift lipstick, oil film, stubborn mineral deposits and water spots from glassware, yet gentle enough that it will not irritate hands and skin across a long shift.
Low-foaming liquid detergent built for automatic electric brush washers. Its oil-free formula powers away beverage residues, lipstick, grease, stubborn lime film and water spots, leaving glassware clean enough to preserve the true flavor and aroma of every pour.
Grit-free waterless hand cleaner formulated with d-Limonene citrus extract, which reaches deep into the skin's pores to dissolve ground-in dirt, grease and heavy soils. An added emollient helps prevent hands becoming red and chapped. No rinsing is required, so it works wherever water isn't available, and it leaves a fresh orange scent.
Premium penetrating oil that works into threads, cracks and joints to lubricate metal surfaces and loosen rusted parts. It displaces moisture and then seals the surface behind it, protecting against future rust and corrosion and extending the working life of machinery. A light blend of oils and inhibitors built for mechanics, machinists, toolmakers, pipe fitters and plumbers.
Ready-to-use cutting oil blended with lubricants and additives for machining, tapping, boring and thread-cutting work. It clings to the cutting bit for excellent residual lubrication and rapid heat removal, extending tool life while keeping the workpiece visible. Suited to high-carbon steels, stainless and hard alloys — not recommended for copper or aluminum.
Water-dilutable synthetic coolant and lubricant for cutting, grinding, turning, drilling and tapping across both ferrous and non-ferrous metals. It makes a clear solution when diluted, contains no silicon, and protects finished work from flash rusting. Non-corrosive to all metals including aluminum and copper, with dilution ratios adjustable for best economy.
High-grade dry graphite lubricant that eliminates friction and protects high-use equipment under sustained temperatures up to 2100°F. It dries quickly and sheds moisture, holding up even under steam, damp atmospheres and salt spray, and acts as a sealant for tighter, firmer joints. Use on cast iron, steel alloys, copper, brass, titanium, conveyors and rollers — may harm painted or waxed surfaces.
Water-soluble spreader and wetting agent that lowers the surface tension of herbicides, insecticides, fertilizers and micronutrient solutions so they absorb faster into soil and foliage. Assures even, thorough coverage while cutting run-off and wash-off of expensive chemicals. An economical way to get full value from every spray application.
Concentrated liquid detergent for automatic washers, built on anionic and non-ionic surfactants and stain removers that lift grease and soil and hold them in solution so they cannot redeposit on fabric. Optical brighteners keep colors bright, and added water softeners maintain performance in hard water. Fragrance free, biodegradable and non-polluting.
Liquid pre-treatment that stops snow and ice bonding to pavement when applied before a storm, and accelerates the action of solid ice melt applied afterward. Effective in temperatures down to -10°F, and it improves the performance and longevity of rock salt and sand when laid down first. Also used on walkways, rail switches, outdoor conveyors and elevators.